Jetter JM-108, User Manual, Page: 18 / 106

1 Safety Instructions
18 Jetter AG
Fig. 1: Shielding of SUB-D connectors in conformity with EMC standards
Fig. 2: Shielding of screw terminals to EMC standards
If the shield cannot be attached to the connector, for example, with a screw
type terminal:
It is important that shield and strain relief are highly conductive and directly
connected to a grounded surface with the greatest possible surface area.
When doing so, grounding must be implemented in a way that the
unshielded portion of the cable is as short as possible (refer to Fig. 2).
JetMove 108
Metal Rail
Motor Cable
Shield