Jetter JM-108, User Manual, Page: 25 / 106

JetMove 108 2.5 Notes on Safety as regards Commissioning
Jetter AG 25
2.5 Notes on Safety as regards
Commissioning
Have commissioning jobs carried out by qualified personnel only, see
chapter 1.1.3 "Personnel Qualification", page 12.
Prior to commissioning, please do the following:
Reattach dismantled protective equipment and check it for proper
functioning.
This way, protection from moving parts of the machine will be achieved.
Secure the servo amplifier JetMove 108 against accidental contact with
conductive parts and components.
Only connect devices or electrical components to the signal lines of the
digital servo amplifier JetMove 108 (Enable, Limit+/-, REF, BRAKE) that
have been sufficiently isolated from the mains circuit. These signal lines
may only be connected with units that have got the ground potential of the
+V
LOG
power supply.
Accordingly, do only connect encoders with the servo amplifier, if they
have been sufficiently isolated from the connected mains and motor power
supply.
Always carry out each commissioning, even a short functional test, with
correctly connected PE bus;