Jetter JetWeb JetMove 203-230, User Manual, Page: 65 / 90

JetMove 203-230 9.1 Error Messages
Jetter AG 65
9 Diagnostics
9.1 Error Messages
Note!
In the case of an error message, the letter "F" and two successive numbers
appear on the 7-segment display every second.
Error Message Table JetMove 203-230
Error
Number Type of Error Description Effect Error Correction
F 00 Hardware error Internal hardware
defect – Immediate
pulse disable
– Cut drive controller
from power lines
– Return the amplifier
for repair
F 01 Internal voltage
supply error One or more power
supply voltages are
beyond their limits – Immediate
pulse disable
– Cut drive controller
from power lines
– Return the amplifier
for repair
F 02 One mains phase
has failed
(is only active in
case of a 3-phase
connection) Failure of one of the
mains phases – Immediate
pulse disable
– Check fuses and
wiring
– Acknowledge failure
F 03 Motor cable fault The motor cable is
broken
Please note: The
motor cable is tested
when the drive
controller is enabled
for the first time
– Immediate
pulse disable
– Check the motor
cable connections
– Acknowledge failure
F 04 DC link
overvoltage A DC link voltage
of> 480 V has been
detected – Immediate
pulse disable
– Check input voltage
supply
– If the motor is used as
a generator, reduce
the regenerating
power
– Acknowledge failure