Jetter AG
Programming | 8
User Manual – JCM-501-E01
47 / 65
8.7 Automatic copying of controller data
This chapter describes the Autostart feature allowing for data to be copied within
the JCM-501-E01. To this end, you can create a command file which is then
stored along with the data to a USB flash drive. This command file is then auto-
matically processed when the USB flash drive is inserted.
Functions within
the local file system
The Autostart function executes the following functions:
■
Creating directories
■
Deleting directories
■
Copying files
■
Deleting files
Areas of
application
The Autostart function is typically used in situations where
■
remote maintenance is not possible;
■
there is no PC on site;
■
the operator is not able or should not be allowed to make modifications to the
plant.
The following actions can be taken using the Autostart function:
■
Modify the application program
■
Modify the application data
■
Modify the controller configuration
■
Operating system update (JCM-501-E01)
Prerequisites
For automatic copying of controller data, the following prerequisites must be ful-
filled:
■
The programmer must be familiar with the file system.
Designation
In this description,
Full Name
means the name of the file or directory including its
full path.
