Jetter JCM-501-E01, User Manual

Page: 48 / 65

Jetter AG Programming | 8
User Manual – JCM-501-E01 48 / 65
8.7.1 Loading the Autostart function
The AutoStart function should only be carried out during the boot phase (after
power-up) of the JCM-501-E01.
Relevant
directories Value Remarks
File name autostart.bat All lower case letters
Directory - USB \USB\ Root directory on the USB flash
drive
Tab. 40: Relevant directories
Loading the
Autostart function
ü
You have created the command file and stored it to the respective directory.
1. Insert the USB flash drive into the USB port.
2. Switch the device ON.
ð
The device boots and loads the autostart.bat file.
8.7.2 Executing the AutoStart function
During the boot phase in autostart mode, the device executes the commands in
the command file.
Executing the
Autostart function The operating system of the JCM-501-E01 processes the autostart function in the
following steps:
Step Description
1 The file \USB\autostart.bat is loaded from the USB stick.
2 … n The commands are processed in ascending order.
8.7.3 Terminating the AutoStart mode
The last command in the autostart.bat file terminates the Autostart mode.
Restart As an option, you can reboot the device by placing the following command in the
last line of your command file:
del \System\reset.exe
Exiting Autostart
mode ► To exit the Autostart mode, remove the USB flash drive.
8.7.4 autostart.bat - Structure
The command file is a text file with command and comment lines:
■ You can insert blank lines as required.
■ Start each comment line with REM .
In these sections you can specify commands which are then executed by the Au-
tostart function.