JetStor U Series User Manual Download Page 97

Page: 97 / 124

U Series User Manual

The event log is displayed in reverse order which means the latest event log is on the first / top

page.

Menu: Maintenance

The menu Maintenance is for accessing the Upgrade firmware, Reset to factory default, Reboot

and shutdown and Authentication options.

Submenu: Upgrade firmware

The menu Maintenance -> Upgrade firmware is for accessing the System and Local expander

options.

System

The menu Maintenance -> Upgrade firmware -> System is used to upgrade controller firmware.

Please prepare new controller firmware file named “xxxx.bin” in local hard drive, then click

Browse to select the file. Click OK button to start upgrading the firmware. When upgrading, there

is a percentage displayed in the Managed Product Area. After finished upgrading, the system must

reboot manually to make the new firmware took effect.

Local Expander

The menu Maintenance -> Upgrade firmware -> Local expander is used to upgrade local expander

firmware.

Summary of Contents for U Series

























































































































Search results

Summary of Contents for U Series

Reviews:

JetStor U Series, User Manual, Page: 97 / 124

Search results

Summary of Contents for U Series

Reviews: