JetStor U Series User Manual Download Page 17

Page: 17 / 124

U Series User Manual



If the BBM LED stays Off, then the BBM power has run out and it
cannot provide power for the cache anymore. It needs to be
recharged or replaced.

Management port.

Console port.

RS 232 port for UPS.

SAS JBOD expansion port.

BBM slot.

USB port is used to save debugging information.

LED

10GbE Link LED (724U 10G / 716U 10G):



Orange: Asserted when a 1G link is established and maintained.



Blue: Asserted when a 10G link is establish and maintained.

10GbE Access LED:



Yellow: Asserted when the link is established and packets are being
transmitted along with any receive activity.

CAUTION: Be aware that when Controller Health LED is in RED, please DO NOT
unplug the controller from the system or turn off the power suddenly. This may
cause unrecoverable damage, which will not be covered by warranty.

Summary of Contents for U Series

























































































































Search results

Summary of Contents for U Series

Reviews:

JetStor U Series, User Manual, Page: 17 / 124

Search results

Summary of Contents for U Series

Reviews: