JETSTOR SAS 760J/JD Hardware Installation Guide
Page 9 of 71
2.3
PREPARING FOR INSTALLATION
1.
Carefully read the
Safety Notices
in Appendix A
before proceeding.
2.
Open the top of the box; inspect for damage.
3.
Remove all of the components from the packaging, inspect for shipping damage,
and place them on an antistatic surface until you are ready to use them.
4.
As shown in the following picture, there are two yellow nylon lifting straps that
are used to remove the enclosure assembly from the box. A forklift or other
mechanical lifting device is highly recommended to remove the unit.
Caution: The JETSTOR SAS 760J/JD enclosure is heavy and requires
assistance when lifting or installing the unit in a rack. A JETSTOR
SAS 760J/JD can weigh up to 215 lbs (80 kg) with drives installed. It
is recommended that no drives are inserted prior to installing the
enclosure in a rack. A forklift or lift table is recommended when
installing the JETSTOR SAS 760J/JD to prevent possible injury.
Lifting straps
Unpacking the JETSTOR SAS 760J/JD
