JETSTOR SAS 760J/JD Hardware Installation Guide
Page 40 of 71
Chapter 7 Appendix A: Safety Notices and Cautions
7.1
SAFETY NOTICES
Caution:
Before touching any of the enclosure components, ground
yourself and take antistatic precautions. Use an antistatic wrist strap
and a grounding wire as a minimum precaution.
Caution:
Each storage subsystem must have a good electrical ground
connection through each power cord, through the building power grid
to the point of origin for the building power source entry.
Caution:
Circuit overloading – Consideration should be given to the
connection of the equipment to the supply circuit and the effect that
overloading of circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment nameplate
ratings should be used when addressing power concerns.
NOTE:
The maximum current draw is printed on a label on each of the
JETSTOR SAS 760J/JD PCMs (Power & Cooling Modules).
200-240V 12.4A per PCM, 2 PCMs per JETSTOR SAS 760J/JD.
