JetStor SAS 712U User Manual Download Page 93

Page: 93 / 119

SAS 712 U Series User Manual

Menu: Maintenance

The menu

Maintenance

is for accessing the

Upgrade firmware

Reset to factory default

Reboot

and shutdown

and

Authentication

options.

Submenu: Upgrade firmware

The menu

Maintenance

-> Upgrade firmware

is for accessing the

System

and

Local expander

options.

System

The menu

Maintenance

-> Upgrade firmware -> System

is used to upgrade controller firmware.

Please prepare new controller firmware file named “xxxx.bin” in local hard drive, then click

Browse

to select the file. Click

button to start upgrading the firmware. When upgrading, there

is a percentage displayed in the Managed Product Area. After finished upgrading, the system must

reboot manually to make the new firmware took effect.

Local Expander

The menu

Maintenance

-> Upgrade firmware -> Local expander

is used to upgrade local expander

firmware.

Summary of Contents for SAS 712U





















































































































Search results

Summary of Contents for SAS 712U

Reviews:

Related manuals for SAS 712U

Brands by name

Popular brands

JetStor SAS 712U, User Manual

Search results

Summary of Contents for SAS 712U

Reviews:

Related manuals for SAS 712U

Brands by name

Popular brands