JetStor FX Series Hardware Manual Download Page 107

Page: 107 / 117

Support and Other Resources

Support and Other Resources

7.1.

Getting Technical Support

After installing your device, locate the serial number on the sticker located on the side of the
chassis or from the SANOS UI ->

MAINTINANCE

System Information

To contact

JetStor

Support, please use the following information.






Via the Web:

https://

acnc

.com/support

Via Telephone:

800-213-2667

Via Skype Chat, Skype ID:

jetstor

.support

Via Email:

support@

acnc

.com

Information to collect



Product name, model or version, and serial number



Operating system name and version



Firmware version



Error messages or capture screenshots



Product-specific reports and logs



Add-on products or components installed



Third-party products or components installed

Information for Technical Support

The following syst

em information is necessary for technical support, please refer to

following for what and where to get the information of your

JetStor FX

Series model.

If the technical support requests you to download the Service Package, please navigate in
the SANOS UI ->

SYSTEM SETTING

Maintenance

System Information

, and then click

the

Download Service Package

button to download. Then the system will automatically

generate a zip file the default download location of your web browser.

Summary of Contents for FX Series






















































































































Search results

Summary of Contents for FX Series

Reviews:

Related manuals for FX Series

Brands by name

Popular brands

JetStor FX Series, Hardware Manual

Search results

Summary of Contents for FX Series

Reviews:

Related manuals for FX Series

Brands by name

Popular brands