Jets™ 50M Toilet
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. TO650PO
Doc. Rev.: 4 (2019-01-31)
7
7
Completed.
8
Function Check to be Completed Prior to Use
1. Check that the inside of the toilet bowl is empty of packaging
material, etc.
2. Ensure that the discharge valve has been securely connected to
the outlet pipe.
3. Check that the water supply is connected and water pressure is
adequate.
4. Turn on the water supply.
5. Press the release button to activate the valve.
6. Check that the bowl fills with water.
7. Check that sufficient vacuum is created when activating the
release button to release the contents of the bowl.
8. Check that the water level in the bowl is restored.
9. Check that water is dispersed on the bowl surface by the
flushing mechanism.
10. Check that there are no water or air leaks.
Service and Maintenance
Out of Use
The following procedures are to be followed if a toilet is to be out of use over a longer period of time (i.e. for cabins and recreational houses).
1. Close the water supply to the toilet.
2. Activate the release button to run a flush cycle, emptying the toilet of water.
3. Close the toilet seat cover.
4. CAUTION: This toilet is not intended for use in temperatures below freezing without appropriate antifreeze measures being taken. For
locations where freezing may occur, certain protection measures must be taken. For further information contact Jets Vacuum AS or your
nearest supplier for a copy of technical information regarding freezing protection measures.
5. CAUTION: Never use automotive antifreeze (ethylene glycol) in the toilet system.
6. Turn off the power.
NOTE: Failure to adequately protect the toilet system from damages may result in void of your warranty coverage.
NOTE: Jets Vacuum AS reserves the right to deny any warranty claim submitted if the claim is caused by freezing damage.
Cleaning Instructions
1. Mild soap or biological cleaners are recommended for cleaning the toilet. See Jets™ product range for suitable cleaning solutions.
2. Do not use cleaners that create foam.
3. The toilet is to be cleaned regularly to maintain hygiene. Also note that maintaining water in the toilet bowl will prevent odors.
4. Do not use drain cleaner, bleach or other caustic cleaners. These types of cleaners can damage components in the toilet system and damage
the seat and cover hinges.
5. For mineral scale buildup, we recommend use of Jets Vacuum AS biological descale products. Contact your Jets Vacuum AS supplier for
information.
Spare Parts and Accessories
Available spare parts are indicated in the component list for the toilet. Spare parts and accessories can be ordered via your local Jets Vacuum AS
supplier. For multi-toilet installations, a complete recommendation for spare parts is available. Contact your Jets Vacuum AS supplier for details.
Service and Maintenance
Jets Vacuum AS provides all customers with 24 hour worldwide technical assistance. For urgent matters please contact Jets Vacuum AS service
department directly at +47 70039100. For other matters, please contact your nearest Jets Vacuum AS supplier.
