Jets™ 50M Toilet
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. TO650PO
Doc. Rev.: 4 (2019-01-31)
6
Toilet Connections
Installation may vary depending on plumbing arrangements. Note that the following methods are available for the toilet type.
Installation Alternative 1.
Installation Alternative 2.
General Installation Information
To avoid leakage between the toilet valve and the toilet bowl, it is important that the pipe installation is properly clamped and aligned. Water hoses
must be secured with hose clips.
Installation
General Disclaimer
Drawings provided in the following examples are for illustration purposes only. Product details may vary from your individual purchase.
Installation Instructions
Toilet installation requires the following procedures to be carried out. For more specific technical details, refer to the individual data sheet. For
further information on any of the instructions supplied, any questions regarding installation or the products, please contact your local supplier or
Jets™ Service Department.
1
For installations with a pre-installed
valve, go to step 3.
2
Install the toilet valve
⑦
and the
spring
④
as per the products
instructions found in the products
technical data. Note: Only for
deliveries supplied without a pre-
installed valve.
3
Move the toilet close to the wall.
Connect the ball valve from the toilet
valve to the water main.
Note: Do not over tighten.
4
Connect the release button to the toilet valve.
For connection information see the installation description provided in
the Release Button's technical data sheet.
5
Press the valve into the pipe
connection securely.
Note: Refer to Toilet Connections -
Installation Alternative 1 and
Alternative 2.
6
Using the fastening kit floor
⑤
,
securely fasten the toilet to the
floor.
