Page 11
Bullfrog Spas Owner’s Manual
INITIAL START-UP
Important:
Bullfrog Spas come with either a
Standard
or
Deluxe
Control System. Refer only to the Control System
that applies to your spa.
STANDARD CONTROL SYSTEM:
When your spa is first activated, it will go into Priming mode, indicated by “
Pr
” on the display. The Priming mode will
last for less than 5 minutes and then the spa will begin normal operation in Standard Mode. By default, the spa will
begin to heat until it reaches the start-up temperature of 100°F.
DELUXE CONTROL SYSTEM:
When your spa is first activated, it will go into Priming mode, indicated by “
Pr
” on the display. The Priming mode will
last for less than 5 minutes and then the spa will begin normal operation in Standard Mode. For the first one minute,
“
—F
” will appear on the display while the system is sensing the water temperature. By default, the spa will begin to
heat until it reaches the start-up temperature of 100°F.
Note:
The Priming Mode can be accelerated by pressing the “Jets 1” button and then the “Warm or Cool” button.
