Page 10
AUX2 PROGRAM SUB MENU SCREEN
If the right button is pressed you will go into the AUX2 sub menu.
This screen will only appear if Configuration / AUX2 name has
been assigned a name and then that name will appear in the
menu. See AUX1-3 section for details of this sub menu.
AUX3 PROGRAM SUB MENU SCREEN
If the right button is pressed you will go into the AUX3 sub menu.
This screen will only appear if Configuration / AUX3 name has
been assigned a name and then that name will appear in the
menu. See AUX1-3 section for details of this sub menu.
PULSED
If the right button is pressed you will go into the Pulsed sub menu.
This screen will only appear if Configuration Mode / Pulse Enable
is Yes. See Pulsed section for details of this sub menu.
RETRACT TIME
This is the amount of time that the wire will retract at rapid speed
when the wire stops.
CALIBRATION
If the right button is pressed you will go into the Calibration Mode
sub menu. If a password was selected, it must first be entered
before you can get into the sub menu. The password is a five digit
Alpha/Numeric and is set by turning the knob/dial to change each
place. The right arrow moves to the next character to the right
and the left arrow moves back to the left. On the fifth and last
character when entering the password, press the right key; if
correct you will enter the sub menu, if not you will be returned to
the program menu. See appendix A for details of this sub menu.
PROGRAM
ll
u
ll
u
ll
u
AUX1
AUX2
AUX3
PROGRAM
ll
u
ll
u
ll
u
AUX2
AUX3
PULSED
PROGRAM
ll
u
ll
u
0.00
AUX3
PULSED
RETRACT TIME
PROGRAM
ll
u
0.00
ll
u
PULSED
RETRACT TIME
CALIBRATION
PROGRAM
0.00
ll
u
ll
u
RETRACT TIME
CALIBRATION
CONFIGURATION
