JETI model Max BEC 2D, Manual, Page: 5 / 12

the sockets on the Duplex Expander.
Connect the Expander to the Duplex Receiver into the socket marked 'Ext.'. Do not forget to
connect the BEC to the receiver.
Connect the power-supply battery to the BEC and connect the Jeti Box to the Transmitter module
and switch-on the transmitter.
The BEC can now be switched-on using the magnetic key.
4. Menu Navigation
For parameter setting and monitoring of the Max BEC 2D, the Jeti Box is used.
After connecting the Jeti Box according to the above instructions, the screen shows the
identification of the unit, the temperature and the voltage of each supply battery. The active
power-supply input is marked by a "*" character.
By pressing the 'D' (Down) button on the Jeti Box, we enter the menu for the Max BEC 2D.
4.1 ACTUAL VALUE - Actual Values
Actual Value - By pressing the 'D' (Down) button of the Jeti Box, we can view the actual
measured values.
Acc. Input Voltage - Shows the actual voltage of the power-supply batteries A and B.
Temperature - Shows the temperature of the Max BEC 2D
Actual Output Voltage - Shows the actual voltage being output by the BEC.
4.2 MIN / MAX - Minimum and Maximum Values
Min / Max - By pressing the 'D' (Down) button, we can view the extremes of temperature and