Please note that in this configuration, no alarms will be generated because these rely on the
wireless data transfer and acoustic alarm of your Duplex transmitter module.
3.2.2 Connecting the BEC to a Duplex Receiver
Connect the BEC to the receiver using the red JR connector from the BEC. Plug this into the
socket marked 'Ext.' on the Duplex receiver.
Connect the supply battery to the BEC, not forgetting to connect the power output of the BEC to
your receiver!
Now the Jeti Box can be connected to your transmitter module for programming and monitoring of
the system. Switch on your transmitter and then use the magnetic key to switch-on the BEC.
3.2.3 Connecting the BEC to a Duplex Expander
Connect the BEC to the Expander using the red JR connector from the BEC. Plug this into any of
Summary of Contents for Max BEC 2D
Page 12: ......