Jetcom CCTV SS-HDR-8704 User Manual Download Page 7

Page: 7 / 51

1.1

Summary

Chapter I Product Introduction

1.2

Functions and features

Network Digital Video Recorder Operation Manual ( V1.0 )

Support PAL & NTSC video signal input.

Support OSD languages of multiple countries.

Support external alarm, motion detection and time recording.

Support audio recording, audio playing and live mode listening.

This equipment is a standalone digital hard disk video recorder specially designed for security. It adopts the

embedded processor and embedded operating system and integrates with latest technologies in IT field, such as video

frequency/audio frequency compression/decompression, large capacity hard disk storage, TCP/IP network remote

control etc., investing the system with high intellectualization and stability.

This equipment supports various networks including Ethernet and Internet to realize remote audio/video

synchronization. With easy operation, it can be applied to the security for banks, telecom, schools, hospitals,

supe rmar kets ,reside ntial qu arters, factorie s, compa nies, warehouses, restaurants, hotels, parks, museums, water

conservancy facilities, entertainment places and other fields.

Summary of Contents for SS-HDR-8704




















































Search results

Summary of Contents for SS-HDR-8704

Reviews:

Related manuals for SS-HDR-8704

Brands by name

Popular brands

Jetcom CCTV SS-HDR-8704, User Manual

Search results

Summary of Contents for SS-HDR-8704

Reviews:

Related manuals for SS-HDR-8704

Brands by name

Popular brands