Jetcom CCTV SS-HDR-8704 User Manual Download Page 11

Page: 11 / 51

PTZ

INFO

ESC

SEQ

AUDIO

SPOT

Press it to enter PTZ mode, press again to exit.

press it once to pop up a tool menu on the top right of the screen, press it again

to enter into system information menu, press it three times to pop up log list menu.

Press it to exit from the inferior menu and r eturn to the super ior menu. In

record/playback mode, press it to turn back to live mode.

In live/record/ mode, press this key to switch full screen images by sequence.

Press it to pop up audio setup menu.

Press it to pop up the main menu.

Press it to pop up SPOT setup menu.

Lock the machine.

LOCK

are direction keys. In menu mode, select th e listed

options upward/d ownward/leftward/rightward; in PTZ control mode, control

the dome to rotate upward/downward/leftward/rightward.

confirm t he selection and operation.

rewind and forward in playback mode. Change the parameters

value in menu mode.

In live mode,

is four-split key, nine-split key and sixteen-split key.

Direction /

split/

confirm keys

Network Digital Video Recorder Operation Manual ( V1.0 )

Information

Exit

PTZ

Sequence

Audio

SPOT output

Lock

Summary of Contents for SS-HDR-8704




















































Search results

Summary of Contents for SS-HDR-8704

Reviews:

Related manuals for SS-HDR-8704

Brands by name

Popular brands

Jetcom CCTV SS-HDR-8704, User Manual

Search results

Summary of Contents for SS-HDR-8704

Reviews:

Related manuals for SS-HDR-8704

Brands by name

Popular brands