(1) Camera: used to select the channel to be revised parameters.
(2) Camera title: used to set the camera title. Press
key in the remote control / the front panel to turn into
bitmap, the camera title couldn't be changed.
(3) Brightness: used to adjust brightness of the channel.
(4) HUE: used to adjust Hue (chroma) of the channel.
(5) Contrast: used to adjust contrast of the channel.
(6) Saturation: used to adjust acutance of the channel.
(7) Image H-delay: used to adjust the horizontal position
of the picture central point.
(8) Image V-delay: used to adjust the vertical position
o f the picture central point.
(9)
SPOT
time: set the time interval of spot output for the correspond channel, i.e. the display time of each ch annel.
(10) Mask area setup: Mask area: to shield some area by black square. It will turn to black in surveillance or record mode.
Network Digital Video Recorder Operation Manual ( V1.0 )
(a) Left: set the left border for mask area. (b) Right: set the right border for mask area.
(b) Top: set the top border for mask area. (d) Bottom: set the bottom border for mask area.
C A M E R A
0 1
0 1
0 0
0 0
0 0
0 0
0 6
2 2
0 5 s e c
0 0 0
0 0 0
0 0 0
0 0 0
SAVE
SAVE
EXIT
EXIT
SAVE
SAVE
EXIT
EXIT
3.3
Camera setup
22
Summary of Contents for SS-HDR-8704
Page 1: ......
