4.12
Spot output
Network Digital Video Recorder Operation Manual ( V1.0 )
In live preview mode, press
SPOT
key in remote control or click " " icon with mouse to enter SPOT output
setup menu. Take 8 channel DVR as example.
ENTER
ENTER
C H 0 1
C H 0 2
C H 0 3
C H 0 4
C H 0 5
C H 0 6
C H 0 7
C H 0 8
(1) AUTO: After select this item, the system will output
sequence image according to default SPOT out put
interval time. You could set the time for SPOT output as
the following operation.
Enter "Camera setup" menu. Move the cu rso r o n " SPO T
TIME", then you could set the time by pressing
key or left/ right-click with the mouse. It could be set as 0
second or 5--30 seconds. If output interval of some channel
is 0 second, that channel won't output. For example, 8 seconds for channel 1, 0 seconds for channel 2, 3 se conds
for channel 3; then in spot output mode, channel 1 will turn to chan nel 3 afte r the imag e displ aying 8 sec onds ,
channel 3 will turn to the next channel after the image displaying 3 seconds and so on.
(2) If any channel from CH1 to CH8 is selected, the image of those channels will be spot output.
Note: Video input is necessary for Spot output.
43
Summary of Contents for SS-HDR-8704
Page 1: ......
