HVLS Fans
These HVLS Fans have multiple uses including cooling, ventilation and
destratification. They should be installed according to the customer
requirements and as specified by the technical team at Jet Black Fan Systems.
When in doubt our team are happy to assist
–
see contact information for details.
Safety Instructions
Read the instructions before operation of the equipment and store in safe place
for the future use.
a.
This equipment is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the equipment by a person responsible for their safety.
b.
Children should be supervised to ensure that they do not play with the
equipment.
PROHIBITIONS
To reduce the risk of fire, electric shock, or injury to persons, observe the
following:
a.
Installation work and electrical wiring must be done by qualified person(s)
in accordance with all applicable codes.
b.
When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
c.
The installation of the Eurus HVLS Fan must be in accordance with the
requirements specified in this installation manual and with any additional
requirements set forth by the NZECP and all applicable NZ building code
regulations. Code compliance is the responsibility of the end user.
d.
The fan controllers contain high voltage capacitors which take time to
discharge after removal of mains supply. Before working on the fan
controller, ensure isolation of main supply from line inputs at the fan
controller board. Wait three minutes for capacitors to discharge to safe
voltage levels. (notes: the displayer blackness is not the mark that the
voltage has reached the safety level). Failure to do so may result in injury or
death.
e.
Do not connect the fan to a damaged or hazardous power source. Only
qualified technician should attempt to resolve electrical malfunctions.
Contact Jet Black Fan Systems for questions regarding the electrical
installation of the fans.
f.
Risk of fire, electric shock or injury to persons during cleaning and
maintenance. Disconnect the fan system from the power supply before
servicing.
g.
Do not insert foreign objects between rotating fan blades.
