Wire Rope Clip
Below is a diagram showing proper clip installation, it is imperative that you
install the saddle on the live end of the wire rope.
4.3 Connect the supplied Turnbuckles and Guy Cable loop-1 to the eyes of the Slip
Rod as shown in the below figure. Secure the locking nuts as provided for
additional stability
4.4 Attach Eyebolt or Eye screw to the mounting structure, or alternatively drill a
hole through to thread the cable through the hole. The guy cable should be at 30
- 45° from the centre axis of the fan (see below illustration).
Note:
•
If the structure is wooden, it is recommended to drill and insert a metal
sleeve to spread the load of the wire passing through the wooden
structure prior to fixing to bracket. This can also be done for metal
structures.
