Jet ProShop II JPS2-115, Operating Instructions And Parts Manual

Page: 11 / 44

11
Read and understand all
assembly instructions before attempting
assembly. Failure to comply may cause serious
injury.
6.0
Setup and assembly
6.1
Shipping contents
See Figures 6-1 and 6-2.
NOTE: Some parts may have come pre-assembled
to the table saw.
1 Table saw with on/off switch (not shown)
1 Blade (preinstalled on saw)
1 Table insert (preinstalled on saw)
1 Arbor wrench (preinstalled on tool holder)
1 Miter gauge –
A
1 Push stick –
B
1 Handwheel, large mounting hole –
C
1 Handwheel, small mounting hole –
D
1 Guard assembly –
E
1 Anti-kickback pawl assembly –
F
1 Riving knife –
G
1 Low profile riving knife –
H
1 Motor cover –
J
4 Legs –
K
2 Extension wings –
L
1 Operator’s manual (not shown)
1 Product registration card (not shown)
1 Hardware
package
6.1.2
Hardware package
1 Storage hook –
HP1
1 Open end wrench 11-13mm –
HP2
1 Knob –
HP3
1 Spacer –
HP4
3 Hex wrenches, 2.5, 4, 5 mm –
HP5
4 Levelers –
HP6
8 Socket hd cap screws M8x20 –
HP7
8 Socket hd cap screws M6x16 –
HP8
1 Soc hd cap screw w/lock wshr M5x12 –
HP9
2 Tapping screws M5x12 –
HP10
2 Hex cap screws w/flat wshr M8x10 –
HP11
4 Pan hd machine screws M6x16 –
HP12
8 Flat washers M8 –
HP13
12 Flat washers M6 –
HP14
4 Hex nuts M8 –
HP15
NOTE: Fence and rail assemblies with fasteners,
and wood extension tables and legs with fasteners,
are shipped in separate boxes.
Figure 6-1: Contents (not to scale)
Figure 6-2: Hardware (not to scale)