7
Fig 6
Tighten the placed sawblade
sufficiently.
Follow the scale on the back of the
machine.
7.3 Blade guide adjustment
Blade guide adjustment shall never be
performed when the machine is
running.
Position the guide assembly forward/
backward so that the teeth keep a
distance of appr. 2mm to the guide
rollers.
Secure the back guide roller so that
the distance to the saw blade is 1mm.
(Fig 7)
Fig 7
Set the lateral guide rollers so that
they contact the sawblade lightly.
The sawblade may not be pushed out
of place.
Upper blade guide (Fig 8):
Fig 8
Lower blade guide (Fig 9 and 10):
Fig 9
Fig 10
Test run:
Press the break release button (L, Fig
5) and turn the wheels by hand and
inspect the adjustments made.
Start the machine with care.
Workpiece setup:
Bring the upper blade guide to a
distance of approx 5mm to the
workpiece (Fig 11).
Fig 11
For your own safety, always set the
saw guide as close to the workpiece
as possible.
7.4 Table tilting
Loosen the lever (S, Fig 12).
Rotate the handwheel (Q) clockwise to
tilt table up to 45°.
Rotate the handwheel counter
clockwise to tilt the table to the left up
to 10°.
NOTE: If you tilt the table to the left,
you must first swing open the stop
plate (R).
Fig 12
7.5 90° Table Stop adjustment
Use a square to inspect (Fig 13).
Fig 13
Adjust the 90° table stop (T, Fig 14)
for the table to be square to the
sawblade.
