Material binds blade when ripping
*Fence not aligned with sawblade
‐check and adjust rip fence.
*Wrapped wood
‐select another piece of wood.
Material kicked back from blade
*Fence not aligned with sawblade
‐check and adjust rip fence.
*Raving knife not in place
‐high danger, mount immediately with saw guard.
Cutting surfaces is bad
*Wrong sawblade used
*Blade mounted backwards
*Resin collection on sawblade
*Sawblade is dull
*Workpiece inhomogeneous
*Feed pressure too high
‐do not force the workpiece.
Blade does not raise or tilt
*Sawdust in mechanisms
‐clean‐and re‐grease.
Sliding table does not move
*Sawdust in bearing guides
‐wipe out any sawdust.
10. Environmental protection
Protect the environment.
Your appliance contains valuable materials which can be
recovered or recycled.
Please leave it at a specialized institution.
11. Available accessories
Refer to the JET‐Pricelist for various accessories.
