Jet JTM-1050EVS2, Operating Instructions And Parts Manual

Page: 6 / 48

6
27. Do not stand on the machine. Serious injury
could occur if the machine tips over.
28. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
29. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
30. Clamp workpiece or brace against column to
prevent rotation. For safety and use of both
hands, use clamps or a vise to hold work.
31. Use recommended speed for cutter/drill
accessory and workpiece material.
32. Direction of feed – feed work into a blade or
cutter against the direction of rotation of the
blade or cutter only.
33. Installation work and electrical wiring must be
done by a qualified electrician in accordance
with all applicable codes and standards.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious, or even fatal, injury.
4.0
About this manual
This manual is provided by JET, covering the safe operation and maintenance procedures for the JET Model
JTM-949EVS/230 and JTM-1050EVS2 Turret Mills. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. Your machine has
been designed and constructed to provide consistent, long-term operation if used in accordance with the
instructions as set forth in this document.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our
web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting assembly or
operation! Failure to comply may cause serious injury!
Register your product using the mail-in card provided, or register online:
http://www.jettools.com/us/en/service-and-support/warranty/registration/