21
Abbildung 6‐1: Montage vom Keilriemenschutz
Befestigen Sie den Keilriemenschutz mit der Schraube
(87, Abb. 6‐2) am Gehäuse.
Abbildung 6‐2: Befestigung am Gehäuse
6.4
Montage Schleifteller
Den Schleifteller (C, Abb. 6‐3) auf die Welle schieben
bis die Oberfläche des Tellers mit dem Wellenende
fast bündig ist. Das Wellenende darf nicht in die
Schleiftellerfläche hineinreichen. Den Teller mit der
Schraube (68) festsetzen.
Das Tellerschleifpapier montieren und kräftig
festdrücken.
Abbildung 6‐3: Montage des Schleiftellers
6.5
Montage Schleiftellerschutz
Den Schleiftellerschutz (D, Abb. 6‐4) mit 2 Schrauben
(89) befestigen.
Abbildung 6‐4: Montage Schleiftellerschutz
6.6
Montage der Schleifband‐Abdeckung
Die Schleifband‐Abdeckung (E, Abb. 6‐5) mit
Schraube und Scheibe (57, 58) befestigen.
Abbildung 6‐5: Montage der Schleifband‐Abdeckung
6.7
Montage des Schleiftisches
Die Haltestange (69, Abb. 6‐6) in die vorgesehene
Bohrung des Gehäuses schieben und mit Schraube
(35) festklemmen. Den Schleiftisch (F) auf die
Haltestange schieben und ebenfalls mit Schraube
festklemmen.
Abbildung 6‐6: Montage des Schleiftisches