7
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and
maintenance procedures for the JET Model JMS-10SCMS
Dual Bevel Sliding Compound Miter Saw
with
laser. This manual contains instructions on installation, safety precautions, general operating procedures,
maintenance instructions and parts breakdown. This machine has been designed and constructed to
provide years of trouble free operation if used in accordance with instructions set forth in this manual. If
there are any questions or comments, please contact either your local supplier or Walter Meier. Walter
Meier can also be reached at our web site: www.waltermeier.com.
Specifications
Model Number ..................................................................................................................... JMS-10SCMS
Stock Number................................................................................................................................ 707110
Motor ............................................................................................................................... 120V, 60Hz, 15A
No Load Speed (Arbor) ............................................................................................................... 4200RPM
Motor Arbor Shaft Size ........................................................................................................................ 5/8"
Blade .................................................................................................................... 10", 40T, carbide tipped
Blade Arbor Size ................................................................................................................................. 5/8"
Miter Stops .................................................................................................................10 stops, -45° to 60°
Bevel Stops ................................................................................................. 0°, 33.9° and 45° left and right
Base Dimensions (WxD) .................................................................................................. 37-1/2” x 26-1/4”
Footprint, without optional extensions (WxD)* .............................................................................. 41” x 42”
Cord Length ....................................................................................................................................... 7’-6”
Net Weight ...................................................................................................................................... 51 lbs.
Shipping Weight .............................................................................................................................. 56 lbs.
* Space required for full range of miter, bevel and slide motions
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.
Cutting Capacity
Cut Type
Miter Angle
Bevel Angle
Cutting Capacity
Cross Cut
0º
0º
3-5/8" x 12"
Miter
45º Right & Left
0º
3-5/8" x 8"
Miter
60º Right
0º
3-5/8" x 5-3/4"
Bevel
0º
45º Left
1-5/8" x 12"
Bevel
0º
45º Right
1-3/8" x 12"
Compound Cut
45º Right & Left
45º Left
1-5/8" x 8"
Compound Cut
45º Right & Left
45º Right
1-3/8" x 8"
Compound Cut
60º Right
45º Right
1-3/8" x 5-3/4"
Vertical Capacity (Baseboard)
0º
0º
4-3/4"
Read and understand the entire contents of this manual before attempting
assembly or operation! Failure to comply may cause serious injury!
