Jet JDPE-20EVS-PDF, Operating Instructions And Parts Manual

Page: 16 / 28

16
Excessive drill bit
runout, or wobble.
Bent drill bit. Replace bit.
Bit, or chuck not properly installed. Reinstall bit, or chuck properly.
Worn spindle bearings. Replace spindle bearings.
Spindle will not retract.
Return spring out of adjustment or
damaged.
Adjust or replace as needed.
Spindle retracts too
slowly or too quickly.
Improper return spring tension. Adjust spring tension.
* WARNING: Some corrections may require a qualified electrician.
Table 5
11.0 Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-
800-274-6848, Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and Serial
Number of your machine available when you call will allow us to serve you quickly and accurately.
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET.
Some parts are shown for reference only, and may not be available individually.