Jet JDPE-20EVS-PDF, Operating Instructions And Parts Manual

Page: 14 / 28

14
9.3 Lubrication points
Regularly scheduled maintenance is crucial to ensure a long service life for your machine. The following are
recommendations and may vary based upon frequency of use. Note: Ball bearings are pre-lubricated and
sealed, and require no further attention.
Disconnect machine from power before lubricating.
Refer to Figures 9-1 and 9-2.
Table 4
Location Action Lubricant Frequency
1 Splines on spindle
Lower spindle and insert grease
into hole atop pulley; raise and
lower spindle to distribute
NLGI #2 lithium tube grease Monthly
2 Quill and column
Wipe down and apply light coat of
oil
SAE 20 Machine tool oil Periodically
3 Rack Clean with kerosene and apply oil. SAE 20 Machine tool oil Weekly
4 Gearbox
Insert into grease fitting using
grease gun Mobil DTE ® Oil Heavy Medium, or
equivalent
Daily
5
Quill return spring
(see Figure 8-3) Apply oil beneath spring housing
using squirt can
SAE 20 Machine tool oil Annually
Figure 9-1
Figure 9-2