Jet JDPE-20EVS-PDF, Operating Instructions And Parts Manual

Page: 6 / 28

6
4.0 Specifications
Table 1
Model number JDPE-20EVS-PDF JDPE-20EVSC-PDF
Stock number 354250 354251
Machine type Step pulley model Clutch model
Motor and Electricals
Motor type Totally enclosed, fan cooled, induction
Horsepower 1.5 HP
Phase 3 Phase
Voltage 230 V
Cycle 60 Hz
Listed FLA (full load amps) 4.6 A
Motor speed 1720 RPM
Motor cord SJT 4/C, 14AWG 300V
Inverter rating 2HP 115V 1PH
Input power requirements 115V, single phase
Main power cable SJT 3x14AWG 300V, 6 ft., with plug
LED Work lamp 12V, 6W; separate power cord SJT 3x18AWG, 6 ft. with 115V plug
Power transfer Belt and pulley
On/Off switch Magnetic contactor
Speed range engagement Step pulley Clutch
Recommended circuit size
1
20 A
Sound emission without load 2 60dB
Capacities
Drills to center of circle (Swing) 19-11/16 in. (500 mm)
Drilling capacity, cast iron 1-1/4 in. (32 mm)
Drilling capacity, mild steel 1-1/8 in. (28 mm)
Tapping capacity, cast iron 5/8 in. (16 mm) manually for For/Rev
Tapping capacity, mild steel 5/8 in. (16 mm) manually for For/Rev
Spindle to table distance, maximum 32.6 in. (830 mm)
Spindle to base distance, maximum 46.85 in. (1190 mm)
Spindle taper MT3
Spindle rotation Forward/reverse
Quill diameter 2.16 in. (55 mm)
Number of spindle speeds Infinitely variable within specified range
Spindle speed range 50~390, 280~2000 RPM
Spindle travel
Manual 5 in. (127 mm)
Auto 4-1/4 in. (107 mm)
Number of power feeds 3
Power feed range 0.005, 0.007, 0.010 in. (0.12, 0.18, 0.25 mm)
Table and Column
Table size LxW 16.5 x 18.5 in. (420 x 470 mm)
Table working surface LxW 14.96 x 13 in. (380 x 330 mm)
Number of T-slots 2
T-slot size WxD 5/8 x 11/16 in.
T-slot centers 7.5 in. (190.5 mm)
Table weight capacity 110 lbs. (50 kg)
Column diameter 4 in. (101.6 mm)