22
Trouble Probable
Cause
Remedy
Premature blade
dulling.
Teeth too coarse.
Use finer tooth blade.
Blade speed too fast.
Reduce speed.
Inadequate feed rate.
Adjust cylinder dial setting as needed.
Hard spots or scale on material.
Hard Spots: Increase feed rate. Scale:
Reduce speed and increase feed rate.
Work hardening of material (especially
stainless steel)
Increase feed rate.
Blade installed backwards.
Remove blade, twist inside-out and re-
install.
Insufficient blade tension.
Adjust as needed.
No coolant flow.
Pump motor burned out.
Replace pump.
Filter screen clogged.
Clean filter screen.
Coolant level low.
Add coolant to tank.
14.0
Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848, Monday through Friday (see our website for business hours, www.waltermeier.com).
Having the Model Number and Serial Number of your machine available when you call will allow us to
serve you quickly and accurately.