Jet-tech XG-37, Operation Manual

Page: 27 / 35

e
leCtrICal
C
omPonents
8
P
art
n
o
. d
esCrIPtIon
1.
01001408
Soft start module
2. 01001406 Main control module
3. 01001407 Relay module
4. 01001561 Electrical panel
5. 01000556 Transformer, primary - 120 VAC, secondary - 24 VAC, 40VA
6. 00000039 Screw, transformer mounting, 10-32 x 3/8" phillips TH, MS, SS (2 required)
7. 01001464 Switch panel membrane
8. 01000592 Light, green, 125VAC [.591 or .592?]
9. 07000171 Red In Use light
10. 01000606 Gauge, digital temperature, with probe
11. 01001534 Screw, phillips truss head, 4-40x1" (2 required)
01000618 Nut, 4-40, temperature gauge mounting (2 required)
12. 01000741 Retaining plate, temperature gauge sensor probe
13. 00000026 Nut, retaining plate, star, #6
01000641 Washer, retaining plate, star, #6
14. 01000669 Plug, three wire
15. 01000547 Receptacle, three wire
16. 01000670 Plug, solderless terminal
01000473 Power cord, 8' with grounded plug
17. 01000553 Switch, drain motor cam (2 required)
18. 00000040 Screw, drain motor cam switch mounting 4-40 x 1", PPH, MS, SS (4 required)
19. 07000259 Switch insulator (2 required)
20. 00000001 Clamp, cable, white nylon, 5/8" (6 required)
21. 00000153 Screw, phillips pan head (6 required)
22. 01001425 Wire harness, jumper
23. 01001424 Wire harness, chemical pump
24. 01001426 Wire harness, power
25. 01001427 Wire harness, switch panel
26. 01001544 Probe, temperature sensor for main control module
27. 01001429 Actuator, magnetic
28. 00000076 Bolt, 8-32 x 1/2", hex head (2 required)
25 22
23