Jet-tech XG-37, Operation Manual

Page: 14 / 35

8
MVP Group Corp - 5659 Royalmount Ave., Montreal, QC, Canada H4P 2P9
Tel: 514.737.9701 / 888.275.4538 - Fax: 514.342.3854 / 877.453.8832
sales@mvpgroupcorp.com - www.mvpgroupcorp.com
c
leanInG
I
nstructIons
Regular maintenance of your Jet-Tech glasswasher will extend its useful life and lower the service costs. The
following parts are removable for daily cleaning:
1. Drainboard insert
2. Drainboard pan
3. Sliding cover
4. Inner cover
5. Conveyor
6. Spray box
7. Spray box gasket
8. Tank screen
9. Pump inlet screen
10. Drain stopper
11. Scrap tray
The daily cleaning procedures consist of the following steps:
1. Remove drainboard insert, drainboard pan, sliding cover, and inner cover.
Wipe down each part as necessary.
2. Remove the conveyor wheel. Any large debris found inside the machine, like
broken glass, lemon seeds, stir sticks, and so on, should be removed.
3. Remove and scrub clean the spray box, spray box gasket,
and tank screen. Remove and wipe down the drain stop-
per. Remove any debris from the lower wash tank. Make
sure nothing is clogging the pump inlet screen. The pump
inlet screen can be removed for cleaning if necessary.
Drainboard insert
Drainboard pan
Sliding cover
Inner cover
Spray box
Spray box gasket (located under
spray box - not shown)
Conveyor
Tank Screen
Pump inlet screen
Drain stopper