Jet-tech XG-37, Operation Manual

Page: 1 / 35

XG-37
ROTARY BAR
GLASSWASHER
Standard Features :
Fill and dump style cycle uses less water and energy than traditional rotary glasswashers.
Conveyor easily lifts out
for cleaning access.
Drain stopper is controlled by a quiet and
reliable gear motor with linkage cam
instead of a noisy solenoid valve.
Chemical fill is easily visible by
sliding the cover open during the
fill portion of the wash and rinse cycle.
Stationary spray box simply
unlatches for easy visual
inspection and cleaning.
Incoming water line has built-in
air gap so no separate vacuum
breaker accessory is required.
Special mounting bracket allows
for easy service access to water
recirculating pump.
Unit plugs into standard 120V electrical outlet for an easy installation.
Computer controlled fill cycle allows for 75°F (24°C) rinse, providing clean glasses that are cool to the touch.
The sliding cover and cold water rinse prevent steam from escaping during and after the cycle.
Unique drainboard top provides integrated glassware landing area.
Exclusive design with side notch provides space for three one-gallon chemical containers within the 24" by 24" foot print.
Conveyor advance switch rotates conveyor one-half turn for easy loading and unloading of glassware.
Covers and drainboard top are easily removable for cleaning access.
Pre-programmed de-liming cycle for easy removal of mineral deposits during maintenance (de-liming agent must be added).
Conveyor and stationary spray box are easily removed for cleaning and visual inspection.
Automatic peristaltic metering pumps accurately dispense detergent, sanitizer, and rinse aid.
Mechanicals :
Dimensions :
3 = COLD WATER
2 = HOT WATER
1 = DRAIN
4 = ELECTRICAL
PLAN VIEW
Sliding
Door
Open
FRONT VIEW SIDE VIEW
NOTE: 1. In all cases, consult local plumbing, electrical and health
codes for regulations which may not be consistent with the
information on the front of this specification sheet
2. The utility connections are made from the floor at the bottom
of the unit approximately 7" to 8" high.
3. The Jet-Tech policy of constant quality improvement means
specifications are subject to change without notice.
24"
24"
10-3/32"
7"
14.75"
30" 30.75"
6"
24"
7"
10.625"
24"
2
3
1
4
4.312"
5"
10.5"
7.5"
9"
15.531"
MVP GROUP CORPORATION
5659 Royalmount Ave. Montreal QC, Canada H4P 2P9
Tel: 514.737.9701 / 888.275.4538
Fax: 514.342.3854 / 877.453.8832
sales@mvpgroupcorp.com
www.mvpgroupcorp.com