Assembly Instructions
Step 1: Assembly of the F
lip
Stop
a.
Using the 5/32" hex key, a
ttach the f
lip
stop
upper
(Part #20) and the
flip
stop lower (Part
#13)
using
(1) ¼-20 x ½
"
button head cap screw
(Part #17)
and
(1) ¼-20 x ¾
"
button
head cap
screw
(Part
#18)
along
with (2) ¼”
x 5/8
"
washers
(Part #19)
.
See
Figure 1
b.
Attach the
clamping
handle (Part #11)
along with
(1)
1/4" x 5/8" washer (Part #19)
to the
flip
stop
assembly using the
Flip Stop T-Bolt
-
Short
(Part
#35)
as
shown in
Figure 1
.
a.
Loosen the
clamping
handle (Part #11)
and
slide the
F
lip
S
top
T-Bolt
- Short
(Part #35)
into
the
T-slot
on
the Fence
Extrusion (Part #33)
.
See
Figure 2
Figure 1
Figure 2
Step 2: Attaching the
F
lip
S
top to the Mite-R-Excel II™ Fence
35
17
18
19
20
13
11
11 35 33
5
The following instructions are for assembling the Mite-R-Excel II™. Please note that the Mite-R-Excel II™
is factory set and only assembly is required.