c.
Measure from the right side of the stock 20 inches to the opposite side. Mark the 20
"
spot with a
faint line.
d.
Repeat step
b
. off the 20
"
mark.
e.
Using a 5/16 drill bit, drill the center mark of both locations and use a countersink to allow the
(2)
¼-20 x 1-1/8
"
Phillips Flat Head Screw (Part #5
8
) to sit flush
or below
with the fence face.
f.
Using the (2) ¼-20 square nuts (Part # 5
7
) provided
,
attach the
sacrificial
fence
(Part D)
into the
front T-Slot
on the
fence
extrusion.
See
Figure
2
2
** The
Flip Stop
on the Mite-R-Excel II™ was designed to adjust up to ¾
"
. Be sure to
adjust the F
lip
Stop so that you can still use the stop with the sacrificial fence
.
Figure
2
1
19
D
5
8
