EN
-
10
BA-0016 • 2020-10-15
5 Commissioning and welding
WIG 165i
5.1 Mains port
1
Plug the mains plug into the corresponding socket.
5.2 Control elements
5.2.1 WIG 165i
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
DANGER
Personal injuries and material damage
Incorrect mains connection can result in personal injuries and material damage.
• Do not mount the components until the mains plug is disconnected.
• Connect the system only to the sockets which have protective earthing conductor.
• Only qualified personnel are permitted to perform work on the device or system.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
Fig. 3
WIG 165i
front view
A
Welding current indicator light
B
Fault indicator light
C
“Slope up” (Su) indicator light
D
“Slope down” (Sd) indicator light
E
Post gas indicator light
F
Overheating indicator light
G
Working parameters selection button
H
“−” button for setting the working
parameters
I
“+” button for setting the working
parameters
J
Indicator light for the operating mode
electrode welding
K
Indicator light for the operating mode
TIG 2-cycle without HF (lift arc)
L
“Mode” button for selecting the operating
modes
M
Indicator light for the operating mode
TIG 2-cycle with HF
N
Indicator light for the operating mode
TIG 4-cycle with HF
O
Display
A
B
C
E
F
D
G
H
I
J
K
L
M
N
O
