JESS WELDING MIG 296, Operating Instructions Manual

Page: 32 / 56

operation instructions page 3
2. Technical data
Power source
MIG 296 MIG 326
MIG 406 MIG 506
Supply voltage, 50/60 Hz 400 V, 3-phase 400 V, 3-phase 400 V, 3-phase 400 V, 3-phase
Max. current consumption 17 A 24 A 32 A 41 A
Fuse 16 A slow 20 A slow 25 A slow 32 A slow
Max. power draw 12 kVA 16 kVA 22 kVA 28 kVA
Cos phi 0.85 0.85 0.85 0.85
Set-point range 30 - 290 A 50 - 320 A 50 – 400 A 60 – 500 A
Operating voltage 16 - 29 V 16 - 30 V 16 – 34 V 17 – 39 V
Open-circuit voltage 19 - 45 V 20 - 48 V 20 – 52 V 23 – 61 V
Voltage steps 12 x fine
24
2 x coarse,
12 x fine
24
2 x coarse,
12 x fine
24
2 x coarse,
12 x fine
Duty cycle 35 % 290 A / 29 V
Duty cycle 50 % 500 A / 39 V
Duty cycle 60 % 260 A / 27 V 320 A / 30 V 400 A / 34 V 440 A / 36 V
Duty cycle 100 % 220 A / 25 V 250 A / 27 V 250 A / 27 V 320 A / 30 V
System of protection IP 23 IP 23 IP 23 IP 23
Insulation class H (180° C) H (180° C) H (180° C) H (180° C)
System of cooling F F F F
Weight incl. wire feed unit 120 kg 155 kg 169 kg 179 kg
Dimensions L x W x H (mm) 1040 x 460 x 720 excl. case
1040 x 460 x 1040 incl. case
Noise level < 70 dB(A)
→
Manufactured in accordance with European Standards EN 60 974-1 and EN 60 974-10