![background image](http://html2.mh-extra.com/html/jensen/vm9216bt/vm9216bt_operating-instructions-manual_3772213069.webp)
69
VM9216BT
10. A prompt to pair or bond should appear on your mobile phone. Accept the
request and initiate the process.
NOTE: Some mobile phones require a “pass key” or pairing code to connect. If your
phone requires a pass key or pairing code, you will need to enter this number. The
default pairing code for many wireless phones is “0000”. The default code for the
unit is “1234”.
11. A prompt to enter a PIN number or passkey for the unit should appear. The
default passkey for the unit is “1234”.
12. At this point a prompt stating that pairing is successful should appear.
Another prompt should appear asking connect to the unit, Yes or No. Press
Yes. The mobile phone and the unit should connect. The mobile phone should
display a message similar to “Device Connected.” The mobile phone and the
unit are now connected. VM9216BT will appear on the mobile phone list of
devices.
Managing Incoming Calls
When connected to a Bluetooth® phone, the unit will mute audio output, pause
CD play, and change to the Bluetooth screen below when a call is received. The
incoming phone number or as-signed name for that number will appear in the top
of the screen. An audible tone will sound from the unit and a graphic display will
appear on the front panel. If the incoming call has no caller ID, the unit will display
“Private Caller”.
1.
Direct Entry
icon: Touch to access the direct dial screen. Refer to the Direct
Entry screen for further detail.
2.
icon: Touch to answer an incoming call.