JWM9
0A
12
Select a Band
Manual Tuning
Automatically Store / Preset Scan (AS/PS)
Auto Seek Tuning
Preset Stations Menu
Press
AM
button (26) to select the AM band or press F
M
button (25) to select the
FM band. Refer to “Multi source zone mode” on page 9 for detail of operating
instructions
The LCD will display the current station on 1st line and the preset station selection
on the 2nd line in presets menu.
Press the
>>|
or
|<<
buttons (19, 20) to seek stations up/down step by step.
Press and hold the
>>|
or
|<<
buttons (20, 27) to automatically seek the next or
previous strong station.
Store a Station
Select a band (if needed). Press the preset button to select the corresponding
stored station.
1.Press the
PRESETS
button (9) to access the preset menu.
2.Press
I<<
or
>>I
buttons (19, 20) or rotate the
VOL/ENTER
knob to select the
preset location to store.
3.Press and Hold the
ENTER
knob to store the current station at that preset
location.
4.Press the
BACK
button (2) to exit presets menu.
Recall preset stations
1.Press the
PRESETS
button (9) to access the preset menu.
2.Press
I<<
or
>>I
buttons (19, 20) or rotate the
VOL/ENTER
knob to navigate the 12
and 18 preset stations for AM or FM respectively.
3.Press the
ENTER
knob to confirm the selection.
4.Press the
BACK
button (2) to exit preset menu
Automatically Store
Select an AM or FM band. Press and hold the
AS/PS
button (10) for more than 3
seconds and the unit will automatically scan for and store 12 or 18 strongest stations
for AM or FM respectively. To stop this function before the automatic storing is
complete, press AS/PS button again.
Preset Scan
Select a band. Press
AS/PS
button to scan stations stored in the current band. The
unit will pause for 10 seconds at each preset station. Press
AS/PS
again to stop
scanning when the desired station is reached.
TUNER OPERATION
AUX
1
HDMI
USB
9
10
11 12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
8
7
6
5
4
3
2
1