11
SETTING THE CURRENT TIME MANUALLY
1. With the unit in standby mode, press and hold the
PRESET/TIME SET
button on the main unit or press the
TIME SET
button on remote control until
“12Hr” is blinking on the LED Display.
2. Press the
or
button on main unit or remote control to switch
between 12 hour (12Hr) and 24 hour (24Hr) format. Press the
PRESET/TIME SET
on the main unit or
TIME SET
button on remote control
again to confirm your time format selection.
3. The Hour digits will start to blink. Press the
or
button on main unit
or remote control to set the correct hour.
Press the
PRESET/TIME SET
on
the main unit or
TIME SET
button on remote control again to confirm.
Note:
Make sure the hour is set so that the
AM
or
PM
indicator is displayed
correctly
.
4. The Minute digits will start to blink. Press the
or
buttons on main
unit or remote control to set the correct minute.
Press the
PRESET/TIME
SET
on the main unit or
TIME SET
button on remote control again to
confirm.
ALARM OPERATIONS
This unit provides two different wakeup times,
ALARM1
and
ALARM2
. You
can choose to use them independently or simultaneously:
ALARM1
,
ALARM2
or both
ALARM1
and
ALARM2
.
SETTING THE ALARM(S)
1. Press and hold
the
ALARM 1
button on main unit or remote control, the
ALARM 1
indicator will go on, then press
the
ALARM 1
button again the
hour digits will blink.
2. When the hour digits are blinking, press the
or
buttons on main
unit or remote control to set the hour.
3. Press
the
ALARM 1
button on main unit or remote control to confirm, the
minute digits will now begin blinking.
4. When the minute digits are blinking, press the
or
buttons
on main
unit or remote control
to set the minutes.
5
. Press
the
ALARM 1
button
on main unit or remote control
to confirm the
alarm time,
a wake source
indicator will begin blinking. Press the
or
buttons on main unit or remote control to select the source you want to
wake to, FM Radio or iPod/iPhone.
Note:
!
Alarm time(s) can only be set in Standby mode.
!
When alarm time is reached the clock display & the alarm indicator will
blink together.
!
Don’t dock an iPod/iPhone onto the connector in the docking bay when
the Alarm is sounding .
