4
®
CD511K
Jensen
Connector
(attach to
back of radio)
Wiring Adapter
(attach to car
wiring harness)
Splices
You can make all
these connections
without even being
in the car
Wiring with a Wiring Adapter
This is the easiest wiring method, because it replaces your existing radio. You will have to buy a wire
harness adapter from your dealer, a car stereo installation shop or electronics store. If you use a wiring
adapter, you can connect all wires to the radio before you even start to take your old radio out.
Connect Wires
Splice or crimp the wires from the Jensen
connector to the wiring adapter. Match the
wires according to the chart (below) and the
wiring adapter instructions.
Go to "Testing" on page 6.
Install Wiring Inside the Car
1. Connect wiring adapter to the car's exist-
ing wiring harness.
2. Connect antenna extender cable (not
supplied) to car antenna lead.
Wiring Color Codes
1
3
Antenna
Extender
Cable
2
Car
Antenna
Lead
Car Wiring
Harness
CDC CO
NTROLL
ER
OPEN
DISP
LOUD
LO/DX
EQ
AS
SCN
6
SHF
5
RPT
4
3
PS
CO
M
PAC
T
DIG
ITA
L A
UD
IO
5V
PREOUT
Wiring
Important
If wiring connections are made wrong, the unit will not operate properly and it could be damaged. Follow the
installation instructions carefully, or have the installation handled by an experienced technician.
Professional Tip
Fuse Adapters
No convenient power wire? Install a fuse
adapter having a spade connector.
Fuse
Adapter
Fuse
Crimp on a matching connector and attach:
• Yellow wire–Fuse marked MAIN, BAT
or PWR
• Red wire–Fuse marked ACCY
(accessory), or RADIO
Function
Color
LF– Speaker
white/black
LF+ Speaker
white
LR– Speaker
green/black
LR+ Speaker
green
RF– Speaker
gray/black
RF+ Speaker
gray
RR– Speaker
violet/black
RR+ Speaker
violet
Power Antenna
dark blue
Ground
black
Ignition
red
Battery
yellow
Cellular Mute
pink
5598 CD511K_Ein.p65
3/23/00, 2:05 PM
4
