7
®
CD511K
Test Speaker Connections
These tests make sure the speakers are connected right. If speakers don’t play at all, both wires
may not be connected. If the wrong speaker plays (you hear front speakers when you expect rear
speakers) make sure you connected the wires right.
Balance
Fader
4. Press SEL button four
times.
5. Turn the volume ring
to the left until the
display shows FAD
7F.
Only the front speakers
should be playing.
If not, check the wiring.
Make sure you connected
the wires just like the
chart on page 4.
6. Turn the volume ring
to the right until the
display shows
FAD 7R.
Only the rear speakers
should be playing.
If not, check the wiring.
Make sure you con-
nected the wires just like
the chart on page 4.
1. Press SEL button
three times.
2. Turn the volume ring
to the left until the
display shows
BAL 7L.
Only the left speakers
should be playing.
If not, check the wiring.
Make sure you con-
nected the wires just like
the chart on page 4.
3. Turn the volume
ring to the right until
the display shows
BAL 7R.
Only the right speakers
should be playing.
If not, check the wiring.
Make sure you con-
nected the wires just
like the chart on page 4.
SEL
SEL
2
1
SEL
SEL
3
SEL
SEL
SEL
SEL
5
4
SEL
SEL
6
SEL
5598 CD511K_Ein.p65
3/23/00, 2:05 PM
7