2. Tap
the
SOURCE
button repeatedly to select AUX mode.
E12
3. AUX indicator and “AUH” will show on the LCD DISPLAY.
4. Turn on and start playing the external device you plugged into the AUX IN JACK.
5. Slowly adjust both the volume controls of your unit and the external device until you reach
a comfortable listening level.
Notes:
•
If you connect the unit to the Line-Out Jack of your external device, you only need to
adjust the VOLUME CONTROL of your unit. If you connect to the Headphone Jack of
your external device, you may need to adjust both the volume controls of your external
device and the unit to obtain the desirable listening level.
•
Remember to turn off the unit when you have finished listening. Don't forget to switch off
the power of your external audio device as well.
USE HEADPHONES (NOT INCLUDED)
Connect the plug of the stereo headphone (not included) into the HEADPHONE JACK .
CAUTION
%
Avoid excessive volume levels for long period of time when using the headphones.
Prolonged use at high levels may impair your hearing.
%
Do not use earphones while operating a motorized vehicle, as it may create a traffic
hazard and is illegal in many areas
R
RE
ES
SE
ET
TT
TIIN
NG
G T
TH
HE
E U
UN
NIIT
T
In case of malfunction due to electrostatic discharge, reset the unit by unplug the DC IN power
jack from the back of the unit and also remove all the batteries from the battery compartment.
Wait for 3 minutes before reconnecting the power and turning the unit back on.
CARE AND MAINTENANCE
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.
2. Do not tamper the internal components of the unit.
3. Clean your unit with a dry cloth. Solvent or detergent should never be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
6. If drop-outs or interruptions occur in the music during CD play, or if the
CD fails to play at all, its bottom surface may require cleaning. Before
playing, wipe the disc from the center outwards with a good soft cleaning
cloth.
CLEANING THE UNIT
%
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
%
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture,
Use caution when cleaning and wiping the plastic parts.
%
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinet.
%
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or
polishes as these will damage the finish of your unit.
CAUTION:
Never allow any water or other liquids to get inside the unit while cleaning.
