12. To repeat a particular track, tap the
REPEAT
button once, the Repeat 1 indicator “
”
lights on the LCD DISPLAY.
E10
13. To repeat the entire CD, tap the
REPEAT
button twice, the Repeat all indicator “
ALL”
lights on the LCD DISPLAY.
14. To cancel Repeat Function, tap the
REPEAT
button until REPEAT indicator goes off from
LCD display.
15. To shuffle play the entire CD, tap the
M+/RANDOM
button, the random play indicator
“RAND” lights on the LCD DISPLAY. Tap the
RAMDOM
button again to cancel the shuffle
play if necessary.
16. To stop playing, tap the STOP
button.
17. Tap the Button to turn the unit OFF.
PROGRAM OPERATION
This function allows the tracks to be played in a programmed sequence. Programs can be set
in STOP mode.
1. Tap the
PROG/MEM
button once. The “PROG” Indicator will flash and program Channel
Number "P01" will show briefly and then “00” flashing on the LCD DISPLAY.
2. Slightly rotate the TUNING CONTROL KNOB counterclockwise (TUN-
) or clockwise
(TUN+
) until you hear a “click” sound.
3. Rotate the TUNING CONTROL KNOB counterclockwise (TUN-
) to go DOWN a
track, or clockwise (TUN+
) to go UP a track.The LCD Display will indicate the track
selected to be programmed.
4. Tap the
PROG/MEM
button again to store selection. The program Channel Number will
change to “P02” briefly on the LCD DISPLAY and then “00” flashing to prompt for input
next program track.
5. Repeat steps 2 - 3 to program as many as 20 tracks.
6. Tap the PLAY/PAUSE
button to start the programmed play.
7. You may tap the
REPEAT
button repeatedly to select repeat 1 or all programmed tracks.
8. Tap STOP
button once to stop playback.
9. Tap the PLAY/PAUSE
button to resume programmed play.
10. To cancel programmed play, press the STOP
button twice.
BLUETOOTH OPERATION
PAIRING A SMARTPHONE OR BLUETOOTH ENABLED DEVICE
The Bluetooth feature enables you to stream and play the digital music on your Bluetooth
enabled device to your unit.
1. With the power ON, tap the
SOURCE
button repeatedly to select Bluetooth mode. The
Bluetooth indicator will light and “bt” will be flashing on the LCD display.
2. The unit will go into auto connection mode and search for a previously paired device that
is still active and in range (30 feet/10 meters). If found, a brief welcome melody will be
heard and “bt” indicator will stop flashing and remain on. If no active Bluetooth device is
found, the unit will switch to interactive pairing mode and the “bt” indicator will continue
flashing.
3. To establish a new link, turn on the Bluetooth function of your Bluetooth enabled device
and enable the search or scan feature to find “CD-565” in the list of discoverable
Bluetooth devices. Select the “CD-565” from your available device list when it appears on
its screen and a brief welcome melody will be heard if pairing and connection is
successful. If you are asked for a password, enter “0000”.