AWM970
8
1
3
11
17
5
13
2
10
22
12
18
19
9
23
20
15
7
25
6
16
21
24
14
4
8
CD Operation
Inserting a CD
Insert a CD label-side up into the disc slot (14) and the disc will begin to play.
Ejecting a CD
Press the eject button (15) to stop CD play and eject the CD.
Pausing Playback
Press the
1
/
button (16) to suspend or resume disc play.
Stopping Playback
Press the
5
/
STOP
button (20) to suspend disc play, and “PRE STOP” will appear in the display. Press
the
1
/
button (16) to resume disc play from the last position. Press
5
/
STOP
twice and “STOP”
appears.
Track Select
Rotate the
TUN/TRK
control (12) t
o advance to the next or previous track on the CD. The selected
track number will appear on the display. Rotate the
TUN/TRK
control for more than three seconds
to fast forward or fast reverse through the disc. CD play starts when the play/pause button is pressed.
Fast Forward/Reverse
Rotate the
TUN/TRK
control for more than three seconds
or
press
the
>>
or
<<
buttons on the
remote control (17) to fast forward or fast reverse.
Press and hold
once for FORWARD X 2.
Press and hold
additional times for FORWARD X 4, X 8, X 20 or PLAY. Press the play/pause /
||
button on the control panel (16) or remote control (18) to end fast forward or reverse and
resume normal playback.
Intro Scan (INT)
Press the
2/INT
button
(17) during disc play to play the first 10 seconds of each track on the
current disc. Press
2
/
INT
again to end the scan and play the selected track.
Repeat (RPT)
Press the
3
/
RPT
button (18) during disc play to continuously repeat the selected track (REP 1).
Press again to repeat all tracks (REP ALL). Press a third time to stop repeating.
Random Shuffle (RDM)
Press
4
/
RDM
(19) during disc play to play all tracks on a CD in random, shuffled order. Press
4
/
RDM
again to stop random play.
Programmed Playback
1.
Press the
PROG
button (8)
on the remote control
to access the programmed playback
screen:
2.
Use the , , or cursor buttons (16) on the remote control to access the fields on
the “PROG” screen.
3.
Use the number buttons on the remote control to enter a track number in each field.
4.
Press the
>/||
button (19) on the remote control or highlight “PLAY” on screen and then
press the
ENTER
button (5) to begin playback in the numbered order indicated.
To delete the list, highlight “CLEAR” and then press
ENTER
. Press
PROG
to exit the
programmed playback screen.
Remote Control Direct Track Entry
To select a track directly, use the number pad on the remote control (10). For single digit
entries, press the corresponding number. For two digit entries, press the
10+
button followed
by the last digit (i.e., for track 16, press
10+
and then
6
).
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly.
1.
Press the
GOTO
button (26) on the remote control. The On Screen Display information
will appear with the track number highlighted.
2.
Use the number keys on the remote control to enter the 3-digit track number directly (i.e.
for track 10, enter “010”.
3.
Press the
ENTER
button (5) to confirm and begin playback.
