AWM970
5
1
3
11
17
5
13
2
10
22
12
18
19
9
23
20
15
7
25
6
16
21
24
14
4
8
Basic Operation
Power
Press the
POWER
button
(1)
to turn the unit on or to enter standy mode.
Volume Control / Audio Adjustment / Menu
•
Rotate the
VOL
control (2) clockwise to increase or counter-clockwise to decrease the
volume output.
•
Press the
VOL
control to step through the following audio adjustment options. Rotate the
VOL
control to adjust the selected audio feature.
•
BAS: Adjust the Bass level from “-7” to “+7”.
•
TRE: Adjust the trable from “-7” to “+7”.
•
BAL: Adjust the speaker output balance between “L7” (left) and “R7” (right). “BAL 0”
indicates an equal balance between the left and right speakers.
•
FAD: Adjust the speaker fade between “R7” (rear) and “F7” (front). “FAD 0” indicates
and equal balance between the rear and front speakers.
This function will time out after three seconds of inactivity and the unit will resume normal
operation.
•
Press and hold
the
VOL
control to access the user menu. Press the
VOL
control to step
through the menu options. Rotate the
VOL
control to adjust the selected menu feature.
•
LIGHT: Adjust the standby mode LCD brightness from “LIGHT 1” (least bright) to
“LIGHT 3” (brightest).
•
BEEP: Turn the audible beep confirmation “ON” or “OFF”.
This function will time out after three seconds of inactivity and the unit will resume normal
operation.
Mute / Loudness
Press the
MUTE
button (3) to silence the audio output in tuner, CD, DVD, USB or auxiliary
input mode. Press again to restore the previous volume level.
Press and hold the
MUTE
(
LOUD
) button to toggle the Loudness function on/off.
Liquid Crystal Display (LCD)
The liquid crystal display (LCD) panel (4) displays the frequency, time and activated functions.
To adjust the brightness of the LCD,
press and hold
the
VOL
control to access the user menu.
Press the
VOL
control to step through the menu options. Rotate the
VOL
control to adjust the
LCD brightness from “LIGHT 1” (brightest) to “LIGHT 3” (least bright).
NOTE: When subjected to cold temperatures for an extended period of time, LCD panels
will take longer to illuminate and the display visibility may slightly decrease. Optimal
LCD operation will return to normal when the temperature increases to a normal range.
Auxiliary Input Function
Press the
AUX
button (5) to directly access auxiliary input modes (AUX 1 IN, AUX 2 IN, and
AUX 3 IN) from any other mode when a portable audio device is connected to the unit. To
connect a portable audio device, insert a standard 3.5 mm (audio line output or headphone
output from your portable CD / MP3 / iPod or other media player) into the
AUX A/V IN
(AUX 3
IN) connector (6) on the front of the unit or the Audio/Video Inputs (AUX 1 IN and AUX 2 IN) on
the back of the unit (see “Wiring” on page 4).
Auxiliary Input Connector
For front panel A/V input, an external audio/
video (A/V) source such as a video game
player, camera, etc. can be connected to the
front panel A/V input with the provided
3.5mm A/V cable adapter. Connect the
device to the
AUX A/V IN
connector (6) on
the front panel, and then press
AUX
to
engage the input circuit to “AUX 3 IN”.
Please note that there are several different
A/V cable "standards". The AWM970 is
designed to support the Apple Video iPod
J
cable type, as shown in the inset drawing.
USB Interface Connector
You can connect a USB device directly to USB interface (7) on the front of the AWM970 for
playback of compatible files. Playback begins automatically. Press the
DVD/USB
button (24) to
switch to USB mode from another source. Refer to “MP3/USB Operation” on page 12 for
additional operating instructions.
Clock Display
Press the
T/F
button (8) to alternate between playing time and clock time while in Tuner, CD,
DVD, USB or auxiliary input mode.
3.5 mm A/V Cable
Left Audio
Right Audio
Ground
Video
