AWM970
7
1
3
11
17
5
13
2
10
22
12
18
19
9
23
20
15
7
25
6
16
21
24
14
4
8
Tuner Operation
Selecting a Band
Press the
AM/FM
button (11) to directly access tuner mode from any other function mode or to
change between two AM bands (AM1 and AM2) and three FM bands (FM1, FM2 and FM3).
Tuning / Preset Stations
Manual Tuning
Rotate the
TUN/TRK
(12) control clockwise or
UP
to tune the frequency one step higher.
Rotate the
TUN/TRK
control counter-clockwise or
DN
to tune the frequency one step lower.
Seek Tuning
Rotate and hold the
TUN/TRK
control to automatically tune to the next strong station.
Preset Stations
Six numbered preset buttons store and recall stations for each AM and FM band.
To store a station, select a band (if needed), and then select a station. Press and hold a preset
button for three seconds to store the current station. The corresponding preset number will
appear on the right side of the LCD under the letters “CH”.
To recall a station, select the preferred band and then press a preset button. The unit will
automatically tune to the corresponding stored station.
Automatic Store / Preset Scan (AS/PS)
Automatically Store
Press
AS/PS
(13) for more than three seconds, and the unit will automatically scan for and
store the six strongest stations for all bands. To stop this function before the automatic storing
is complete, briefly press
AS/PS
again.
Preset Scan
Briefly press
AS/PS
to scan all preset stations in the current band. The unit will play each
station for five seconds before moving on to the next station. To stop this function and play the
current station, press the
AS/PS
button again.
